It's time for this week's ReMake It Trash Can DIY!
The Paper Waste Basket
ReMake It! Trash Can
1 or more magazines
2 Ribbons (approx 12" each)
Box Cutter (optional)
Time: About an hour
1) Tear 10-15 colorful pages out of an old magazine (if you have a box cutter, cut along the centerfold to avoid tearing). It’s easier to use a magazine with sturdy paper- for example Vogue or Artforum.
2) Cut strips ¾” wide by 4 ½” long.
3) Take the first strip of paper and wrap it around two of the spokes. Tape the end of the strip down taut to the paper to form a paper chain link.
4) Build the first row of chain links by repeating step 3 until you circle around the trash can. There should be a gap between each link.
5) Start a second row on top of the first by making paper chain links that loop together each set of spokes that have a gap in the previous row. The result is a checkerboard pattern that alternates between a gap and a paper chain link. As you build each layer on top of the last, leave one space open the whole way up.
6) Now we’re going to fill in the open space with a trash can label. At the RePlayGround studio, we’re going to use this trash can to sort recycled paper, so I’ve made a corresponding label. Cut out large letters from a magazine, then cut out cardboard squares and glue the letters on to give the label a good backing. Next punch holes in each of the four corners.
7) Take an end of each ribbon and tie it to the top rim of the trash can. You can secure the knot by taping it down with a small piece of clear tape.
String each ribbon through the corresponding top and bottom hole of the first letter, then loop each ribbon around the nearest spoke. Keep stringing until all the letters are in place. Tie off the ribbons and secure again with tape.
Once you’re done, your Paper Waste Basket will put all other trash cans to waste!
Stay tuned for the last ReMake It! Trash Can DIY in this series!