Friday, November 5, 2010

Do the T-shirt Trash Can Twist!

Hi again! I hope you've all been thinking of fun designs for your ReMake It! Trash Can. Here's my new DIY trash can project of the week. It's the T-shirt Trash Can!



Materials:
ReMake It plastic bag trash can frame
A few t-shirts (we used 3)
Scissors
Ruler
Time:
About an hour

1) Find some old T-shirts that you are ready to recycle! Cut the t-shirts into strips 40” long X 2” wide. You will need a total of 17 strips. I chose 3 colors, but use as many different fabrics as you like!

2) Tie the end of each strip to a spoke towards the bottom of the trash can.

3) Starting with one strip, wrap the strip over the spoke to the right of the spoke the strip is tied to. Complete the wrap around by pulling the strip up between the two spokes. Now wrap around the spoke the fabric is tied to and pull the strip back up between the two spokes. Repeat until you’ve reached the top rim of the trash can.


4) Knot the strip to the top rim of the trash can. With the excess fabric, tuck neatly back down into the top weave. Trim any extra fabric that sticks out.


5) Take the strip tied to the left of the spokes you just finished. Repeat steps 4 and 5 from above for all strips, overlapping the last strip you just finished weaving. You may need to spread apart the already weaved strip so you can loop the new strip over the metal.


When you’ve tied on your last T-shirt strip, your new trash fashion will be this season’s must-have trashion accessory.

Have fun! I'll be back next week with a brand new design!

Upcycle away,

Kathy

1 comment:

Unknown said...

love love the t-shirt trash can! can't wait to see the others. (and use them around the office :)